Hey
Friends today we will see howto format usb flash drive using
MS-DOS.manny times we need to format our usb drives, people findit
difficult so today reading this article you will be able to format you
usb very easily,lets see the steps.
1) Click Start > Run... and type cmdin the box then Click OK
2) The command prompt windowappears.
3) Type the following command:
format X:
Note: Replace "X:" with the letter of your USB Flash Drive.
You can use "diskpart" to list all drive letters.
4) If you want to format it as FAT32 then type:
format X: /FS:FAT32
5) After typing one of the above commands, press Enter
6) When it asks for pressing Enter again, just press it to confirm.
7) It will prompt you to enter a name for the drive, write it and hitEnter
So by reading this article i hope you will be now easily able to format your USB flash dirve.
1) Click Start > Run... and type cmdin the box then Click OK
2) The command prompt windowappears.
3) Type the following command:
format X:
Note: Replace "X:" with the letter of your USB Flash Drive.
You can use "diskpart" to list all drive letters.
4) If you want to format it as FAT32 then type:
format X: /FS:FAT32
5) After typing one of the above commands, press Enter
6) When it asks for pressing Enter again, just press it to confirm.
7) It will prompt you to enter a name for the drive, write it and hitEnter
So by reading this article i hope you will be now easily able to format your USB flash dirve.
No comments:
Post a Comment